Latest Discussions rss feed

This is a list of all the discussions going on here, with the most recently updated first. You can also see a more organised list of discussions by category.

Start a new discussion

  • posted in For Sale: Lisa Guthrie 1868 Wrought Iron Available from Lisa Guthrie on April 24

    Old River Sawmill is a small family owned and operated company. We are in the middle of a very exciting project of removing an 1868 wooden dam out of the Chattahoochee River. This dam has been documented and dated by archeologists. The dam was constructed and attached to the riverbed…

  • posted in Page Comments: MORT Press Democrat Corrections from MORT on April 23
    undefined method `referer' for nil:NilClass
  • posted in For Sale: smokey adams Tools At Spring Conference from smokey adams on April 20

    Smokey is downsizing his shop, am bringing tools for sale to Petaluma conference: books, large tongs, top & bottom swages, punches, hot cuts,cone mandrel, sheet metal stakes & such; new unused 30A spool gun for aluminum – Miller brand; 4×2 old coal forge, rivet forge, and other stuff. I don’t…

  • posted in For Sale: Admin 1868 Wrought Iron Available from Admin on April 20

    As webmaster, I received the following message to post: Old River Sawmill is a small family owned and operated company. We are in the middle of a very exciting project of removing an 1868 wooden dam out of the Chattahoochee River. This dam has been documented and dated by archeologists….

  • posted in Help Wanted: greg buffalo forge 19a shear from greg. 2 comments, most recently from alex bashta III on April 18

    i recently bought a 19a shear at a yard sale for $10. it works ok. i use it for some light duty fabrication. i have a small shop, so space is critical. i have a regular job, but do side work(thats where the tax free $ is). anyway i’ve been…

  • posted in Help Wanted: CBA Education Chairman Josh Buhlert Public Demonstration Opportunity -Pacific Grove, May 5 from CBA Education Chairman Josh Buhlert on April 18

    I’m forwarding this message to the forum incase anyone in the Montery area is interested inparticipating in this event. "I am writing to inquire if you have any blacksmiths that would be willing to bring their anvil and hammers and do a demonstration and/or sell some pre-made (or made to…

  • posted in Help Wanted: CBA Education Chairman Josh Buhlert Public Demonstration Opportunity -Pacific Grove, May 5 from CBA Education Chairman Josh Buhlert on April 18

    I’m forwarding this message to the forum incase anyone in the Montery area is interested inparticipating in this event. "I am writing to inquire if you have any blacksmiths that would be willing to bring their anvil and hammers and do a demonstration and/or sell some pre-made (or made to…

  • posted in For Sale: Herb Upham Flight Diomedia for sale from Herb Upham on April 17

    Please share with your friends that Claudio Bottero’s “Flight Diomedia” will be available at the Spring Conference auction. The starting bid will be $10000 with the funds going to the CBA Education Committee to futher expand their programs.

  • posted in Help Wanted: alex bashta III roman era smith needed from alex bashta III on April 7

    Hey, Folks: Arik here. I had originally committed to doing the Bakersfield Scottish Games as a period blacksmith, but due to family health issues, I will not be able. It’s a one-day event in Bakersfield on Saturday, April 21st. They had offered me $300 plus the ability to keep whatever…

  • posted in For Sale: Herb Upham South Bend 10L Lathe from Herb Upham on April 5

    10L lathe in good condition with modest tooling, parts book and copy of original sales slip: $1500 Ccontact Herb at secretary@calsmith.com

  • posted in CBA News: Mark Kittrick Archives password from Mark Kittrick. 3 comments, most recently from Herb Upham on March 27

    Hello, I have tried to access the archives and am unable to figure out what constitutes the password on my mailing label. Can anyone assist please?

  • posted in For Sale: Pete Kielty time to get rid of a little stuff from Pete Kielty. 6 comments, most recently from David Downing on March 24

    selling; 300# arm and hammer anvil with 4 legged stand, nice, $950 180# trenton, nice, $550 154# hay budden, nice, $475 I will build 3 legged stands for $75 405# cone mandrel, no slot, real nice, $900 Pete 530-677-4900

  • posted in For Sale: Frank Annighofer Platen Table from Frank Annighofer on March 24

    Looking for a used platen table. Will come to spring conference.

  • posted in For Sale: MountainViewForge 115 Blacksmithing Books - $9.99 from MountainViewForge. 2 comments, most recently from Pete Kielty on March 23

    Hello, Please take a look at our website at: http://www.dawnapproaches.com/blacksmithing.html We carry an excellent blacksmithing collection – 115 books on DVD-Rom for $9.99. Over 35,000 pages of blacksmithing resources and old out of print vintage blacksmithing books on 1 DVD-ROM. Out of print books on the old skills that are…

  • posted in For Sale: alex bashta III little giant from alex bashta III on March 21

    If anyone is interested CSULB Metals Dept is selling their Little Giant. this was on the cba facebook page

  • posted in CBA Events: alex bashta III south instructors training location from alex bashta III on March 12

    greetings all, contrary to the info in the new march/april magazine info, the march 31st, instructors training will NOT be in banning as printed. The location will be in Vista, at the antique gas and steam engine museum. Sorry for inconvenience if any. alex bashta III, south ed committee.

  • posted in Help Wanted: DCARS CLAW FOOT TUB from DCARS on March 7

    I am looking for someone in the EAST BAY AREA to cut a few claw foot tubs for me into specific shapes…Can someone please help me do this? Thanks DCARS

  • posted in CBA Events: Pete Kielty Weaverville from Pete Kielty. 3 comments, most recently from Dennis Dusek CBA edu on March 5

    Anyone not attending the event this weekend is going to miss the best thing going!!!

  • posted in Help Wanted: Mike Cabaniss Blacksmith needed to make small hinges from Mike Cabaniss. 2 comments, most recently from alex bashta III on March 1

    I’m looking for someone to make 24 pairs of lift-off or butt hinges, approximately 2″ × 2″. The look should be rustic, not ornate, and the hinge action needs to be tight rather than sloppy. This is a project for Fort Ross State Historic Park, an early 1800’s Russian trading…

  • posted in CBA Events: Dennis Dusek CBA edu Toby Hickman Power Hammer workshop part 2 from Dennis Dusek CBA edu. 3 comments, most recently from Dennis Dusek CBA edu on February 24

    CBA Education presents Toby Hickman Power Hammer workshop part 2. Feb 18/19 Limited to 10 working students $225 for two days. Plenty of room for nonparticipating students $50 for two days. Workshop will be at John Mc Lellan’s shop 6961 Horseshoe Bar Rd. Loomis Ca. We will be cooking lunch….

Forum Links

Recent Posts