Categories » For Sale

To take part, please log in or register

start a new discussion here

• 1868 Wrought Iron Available from Lisa Guthrie on April 24

  Old River Sawmill is a small family owned and operated company. We are in the middle of a very exciting project of removing an 1868 wooden dam out of the Chattahoochee River. This dam has been documented and dated by archeologists. The dam was constructed and attached to the riverbed…

• Tools At Spring Conference from smokey adams on April 20

  Smokey is downsizing his shop, am bringing tools for sale to Petaluma conference: books, large tongs, top & bottom swages, punches, hot cuts,cone mandrel, sheet metal stakes & such; new unused 30A spool gun for aluminum – Miller brand; 4×2 old coal forge, rivet forge, and other stuff. I don’t…

• 1868 Wrought Iron Available from Admin on April 20

  As webmaster, I received the following message to post: Old River Sawmill is a small family owned and operated company. We are in the middle of a very exciting project of removing an 1868 wooden dam out of the Chattahoochee River. This dam has been documented and dated by archeologists….

• Flight Diomedia for sale from Herb Upham on April 17

  Please share with your friends that Claudio Bottero’s “Flight Diomedia” will be available at the Spring Conference auction. The starting bid will be $10000 with the funds going to the CBA Education Committee to futher expand their programs.

• South Bend 10L Lathe from Herb Upham on April 5

  10L lathe in good condition with modest tooling, parts book and copy of original sales slip: $1500 Ccontact Herb at secretary@calsmith.com

• time to get rid of a little stuff from Pete Kielty. 6 comments, most recently from David Downing on March 24

  selling; 300# arm and hammer anvil with 4 legged stand, nice, $950 180# trenton, nice, $550 154# hay budden, nice, $475 I will build 3 legged stands for $75 405# cone mandrel, no slot, real nice, $900 Pete 530-677-4900

• Platen Table from Frank Annighofer on March 24

  Looking for a used platen table. Will come to spring conference.

• 115 Blacksmithing Books - $9.99 from MountainViewForge. 2 comments, most recently from Pete Kielty on March 23

  Hello, Please take a look at our website at: http://www.dawnapproaches.com/blacksmithing.html We carry an excellent blacksmithing collection – 115 books on DVD-Rom for $9.99. Over 35,000 pages of blacksmithing resources and old out of print vintage blacksmithing books on 1 DVD-ROM. Out of print books on the old skills that are…

• little giant from alex bashta III on March 21

  If anyone is interested CSULB Metals Dept is selling their Little Giant. this was on the cba facebook page

• leather aprons from Diana Scherf. 2 comments, most recently from alex bashta III on February 4

  blacksmith aprons of all types. I will be at the spring conference with them or you can e-mail or call me if you have questions or want to order. Web page in construction. Diana Scherf, scherf@sti.net , 209-966-3200

• Industrial size swage block from Utah Old Iron on January 31

  18" X 18" X 4.5" I was told it weighs 300 # when I bought it. $650 I am located in Salt Lake City, Utah ajpcj@earthlink.net Alan 801-580-9514

• Norton 6db Fly Press for sale from Ron Bedgood on January 5

  I have a Norton 6db Fly Press for sale $1600.00. It comes complete with two counter balance balls, no table or tooling. This press is rated at 6 tons and is in great condition. No slop in the ram, threads are in great shape with no cracks in the press….

• Blacksmith Tools For Sale from Jerry Coe. 2 comments, most recently from Jerry Coe on January 2

  I am selling extra tools from my shop: 3x Post vices at $200 each; 1 bench vice 3 in jaw $200; 1 anvil, Haybudden Brooklyn, 108lbs, 19th century excellent condition 4 in x 13.5 in face, no marks $800; 3x pipe vices 3 & 4 inch max. $75 each; 1…

• Hobart Plasma Cutter,used from Jerry Coe on December 4, 2011

  60amp cutter with 20 ft ground and 20 ft cutter leads. and 10 ft cord, will include wall receptacle. Has had light use. Paid $3600 will sell for $1500obo

• Selling a Swage Block from Rguest on November 29, 2011

  I am selling a Blacksmith Swage Block I’ve had for a number of years. It measures 12″×12″×3.5″ It is selling for $500.00 It is located in Hayward 94541 (510) 305-2899

• Anyang 165 Hammer For Sale from Shadill. 2 comments, most recently from Shadill on November 26, 2011

  Hi everyone, I’m selling this Anyang 165 one piece Hammer, has a 10hp 3ph motor, it’s in great shape. My shop has turned into a more modern fab shop than a blacksmith shop, I don’t have it hooked up to run, it was last run at the cba conference last…

• Wanted 100 lbs premium coal from 11:11 Forge. 2 comments, most recently from alex bashta III on November 12, 2011

  I’m almost out of the good stuff I had. I picked up some from California Charcoal, not so good, not buying that again. Hope to find some locally, In So. Cal. ? Anybody have some to sell or know where I can pick some up ? My shop is in…

• Carl Jennings Gates from Julie Henry on November 10, 2011

  I’m posting this on behalf of George Postgate. He has 5 Carl Jennings security gates that he wishes to sell to someone who will appreciate them. Gate Dimensions: 77" tall x 38" wide He also has an inexpensive vulcanizer and propane/ oxygen torch setup for soldering, as well as various…

• Johnson 133B double wide, Nat Gas forge from 11:11 Forge on November 7, 2011

  Turned out to be problem getting the natural gas run into my shop. Gonna stick with coal for now. Blower and all valves working. Spark plug for ignitor need to be replaced. All fire bricks in fair condition. Paint is rusted, Would have worked well for me if I could…

• anvil 4 sale from alex bashta III on November 7, 2011

  got a call from a lady, who says she baught this anvil as a favor to help bury the deceased husband. it looks/fills about 220 lbs, and says on side “wrought iron” in a curved, stamped in shape. under the words, 2 1-2 with a dot centered between the first…